Get it All at usafiredoor.com
Custom Options
Expert Support
Free Shipping*
Request Quote

D-2000 18 Gauge Cold Rolled Steel Hollow Metal Doors
Epoxy primer, honeycomb core, seamless edges, hurricane rated, 3hr. fire rated

D-2000-161 Steel Doors

D-2000-161-Steel Door 2

D-161 Lock Prep

D-2000-86 Steel Doors

D-86 Lock Prep

D-2000-RPD Steel Doors

D-RPD Prep

D-2000 Continuous Hinge Prep

D-2000 Steel Double Door

Here you can create the content that will be used within the module.

D-2000 3 hour fire rated honeycomb core hollow steel metal doors are intended for commercial use. The D-2000 series hollow metal door features 18 gauge cold rolled steel seamless edge construction, a honeycomb core core and a two stage baked on epoxy resin primer.

Features:

Baked On 2 Stage Epoxy Resin Primer
Polystyrene Insulated Core
Warnock Hersey 3 Hour Fire Label
ADA Compliant
Double Steel Door Configurations Available
FL Approved, Texas TDI Impact Inland 1, Seaward Zone

Starting At: $230.00

Get Started

(844)321-3667 (DOOR)(844)321-3667 (DOOR)

Shop By Size & Hardware Prep

161 Cylindrical Lock Prep

Door Size			Hinge Locations				HW Location
(Feet/Inches)	Door Size (Inches)	Net Panel Size	(A)	(B)	(C)	(D)	(E)	Part Number
3/0 x 6/8	36″ x 80″ x 1-3/4″	35-3/4″ x 79-1/8″ x 1-3/4″	7-3/8″	37-5/16″	67-1/4″	X	39-9/16″	D-2000-161-3068
2/0 x 7/0	24″ x 84″ x 1-3/4″	23-3/4″ x 83-1/8″ x 1-3/4″	7-3/8″	39-5/16″	71-1/4″	X	43-9/16″	D-2000-161-2070
2/6 x 7/0	30″ x 84″ x 1-3/4″	29-3/4″ x 83-1/8″ x 1-3/4″	7-3/8″	39-5/16″	71-1/4″	X	43-9/16″	D-2000-161-2670
3/0 x 7/0	36″ x 84″ x 1-3/4″	35-3/4″ x 83-1/8″ x 1-3/4″	7-3/8″	39-5/16″	71-1/4″	X	43-9/16″	D-2000-161-3070
3/4 x 7/0	40″ x 84″ x 1-3/4″	39-3/4″ x 83-1/8″ x 1-3/4″	7-3/8″	39-5/16″	71-1/4″	X	43-9/16″	D-2000-161-3470
3/6 x 7/0	42″ x 84″ x 1-3/4″	41-3/4″ x 83-1/8″ x 1-3/4″	7-3/8″	39-5/16″	71-1/4″	X	43-9/16″	D-2000-161-3670
3/8 x 7/0	44″ x 84″ x 1-3/4″	43-3/4″ x 83-1/8″ x 1-3/4″	7-3/8″	39-5/16″	71-1/4″	X	43-9/16″	D-2000-161-3870
4/0 x 7/0	48″ x 84″ x 1-3/4″	47-3/4″ x 83-1/8″ x 1-3/4″	7-3/8″	39-5/16″	71-1/4″	X	43-9/16″	D-2000-161-4070	$328.00
3/0 x 8/0	36″ x 96″ x 1-3/4″	35-3/4″ x 95-1/8″ x 1-3/4″	7-3/8″	32-11/16″	58″	83-5/16″	55-9/16″	D-2000-161-3080
4/0 x 8/0	48″ x 96″ x 1-3/4″	47-3/4″ x 95-1/8″ x 1-3/4″	7-3/8″	32-11/16″	58″	83-5/16″	55-9/16″	D-2000-161-4080

86 Mortise Lock Prep

Door Size			Hinge Locations				HW Location
(Feet/Inches)	Door Size (Inches)	Net Panel Size	(A)	(B)	(C)	(D)	(E)	Part Number
3/0 x 6/8	36″ x 80″ x 1-3/4″	35-3/4″ x 79-1/8″ x 1-3/4″	7-3/8″	37-5/16″	67-1/4″	X	39-15/16″	D-2000-86-3068
3/0 x 7/0	36″ x 84″ x 1-3/4″	35-3/4″ x 83-1/8″ x 1-3/4″	7-3/8″	39-5/16″	71-1/4″	X	43-15/16″	D-2000-86-3070
3/4 x 7/0	40″ x 84″ x 1-3/4″	39-3/4″ x 83-1/8″ x 1-3/4″	7-3/8″	39-5/16″	71-1/4″	X	43-15/16″	D-2000-86-3470
3/6 x 7/0	42″ x 84″ x 1-3/4″	41-3/4″ x 83-1/8″ x 1-3/4″	7-3/8″	39-5/16″	71-1/4″	X	43-15/16″	D-2000-86-3670
4/0 x 7/0	48″ x 84″ x 1-3/4″	47-3/4″ x 83-1/8″ x 1-3/4″	7-3/8″	39-5/16″	71-1/4″	X	43-15/16″	D-2000-86-4070
3/0 x 8/0	36″ x 96″ x 1-3/4″	35-3/4″ x 95-1/8″ x 1-3/4″	7-3/8″	32-11/16″	58″	83-5/16″	55-15/16″	D-2000-86-3080
4/0 x 8/0	48″ x 96″ x 1-3/4″	47-3/4″ x 95-1/8″ x 1-3/4″	7-3/8″	32-11/16″	58″	83-5/16″	55-15/16″	D-2000-86-4080

RPD Reinforced for Panic Device

Door Size			Hinge Locations				HW Location
(Feet/Inches)	Door Size (Inches)	Net Panel Size	(A)	(B)	(C)	(D)	(E)	Part Number
3/0 x 6/8	36″ x 80″ x 1-3/4″	35-3/4″ x 79-1/8″ x 1-3/4″	7-3/8″	37-5/16″	67-1/4″	X	39-15/16″	D-2000-RPD-3068
3/0 x 7/0	36″ x 84″ x 1-3/4″	35-3/4″ x 83-1/8″ x 1-3/4″	7-3/8″	39-5/16″	71-1/4″	X	43-15/16″	D-2000-RPD-3070
3/6 x 7/0	42″ x 84″ x 1-3/4″	41-3/4″ x 83-1/8″ x 1-3/4″	7-3/8″	39-5/16″	71-1/4″	X	43-15/16″	D-2000-RPD-3670
4/0 x 7/0	48″ x 84″ x 1-3/4″	47-3/4″ x 83-1/8″ x 1-3/4″	7-3/8″	39-5/16″	71-1/4″	X	43-15/16″	D-2000-RPD-4070
3/0 x 8/0	36″ x 96″ x 1-3/4″	35-3/4″ x 95-1/8″ x 1-3/4″	7-3/8″	32-11/16″	58″	83-5/16″	55-15/16″	D-2000-RPD-3080
4/0 x 8/0	48″ x 96″ x 1-3/4″	47-3/4″ x 95-1/8″ x 1-3/4″	7-3/8″	32-11/16″	58″	83-5/16″	55-15/16″	D-2000-RPD-4080

Factory Prep Options

VL 12″ x 12″

NL 7″ x 22″

NL 5″ x 35″

NL 6″ x 27″

1/4 Glass (5″ x 56″)

1/3 Glass (8″ x 56″)

Half Glass

Full Glass

SEC 10″ x 6″

L 12″ x 12″

L 18″ x 12″

L 18″ x 18″

L 18″ x 24″

L 24″ x 12″

L 24″ x 18″

L 24″ x 24″

L 18″ x 64″

L 24″ x 60″

L 24″ x 64″

Shop Modifications	Part Number
Cut-Out Non Reinforced/Non Fire Rated (24″ x 36″ Max)	D-MOD-CUT1-NR
Lg. Cut-Out Non Reinforced/Non Fire Rated	D-MOD-CUT2-NR
Cut-Out with Channel Reinforcement (24″ x 36″ Max)	D-MOD-CUT1
Lg. Cut-Out with Channel Reinforcement	D-MOD-CUT2
Mail Slot Prep -Non Fire Rated	D-MOD-CUT-MAIL
Door Viewer Prep	D-MOD-DV
Deadbolt Prep: 2-1/8″ Dia. 2-3/4″ Backset	D-MOD-DB
Deadbolt Prep: 1-1/2″ Dia. 2-3/4″ Backset	D-MOD-DB1.5
Face Prep For 86 Mortise Locks	D-MOD-86F
Face Prep For Exit Device Trim	D-MOD-RIMF
Face Prep for Through Bolts	D-MOD-THB
Card Lock Face Prep for 86 Mortise Edge Doors	D-MOD-CARD
161 Lock Prep, 2-1/8″ Dia. 2-3/4″ Backset	D-MOD-161
86 Mortise Lock Prep, 1-1/4″ x 8″ Edge Prep	D-MOD-86
Convert 86 Prep to 161 Prep	D-MOD-86161
Inactive Door: Prep for ASA Strike & Flush Bolts	D-MOD-INA
Roller Latch Prep	D-MOD-RL
Flush Bolt Prep Only	D-MOD-FB
Weld-on Flat Astragal	D-MOD-ASTW
Deadbolt Strike Prep for Inactive Doors	D-MOD-DBS
Blank-Out ASA Strike for Inactive Doors	D-MOD-XSTR
Door Height Undercut (4″ Max)	D-MOD-CUT-DHT
Blank-Out Lock Edge & Face	D-MOD-XLOCK
Automatic Door Bottom Prep	D-MOD-ADB
Concealed Overhead Closer Prep	D-MOD-COC

Accessories	Part Number
Conversion Plate: Mortise Lock To Cylindrical Lock	D-ACC-1024
Conversion Plate: Mortise Lock To 4 7/8″ ASA Strike	D-ACC-1043
Filler Plate: 161 Latch 1-1/16″ X 2-1/4″	D-ACC-161F
Filler Plate: 86 Mortise Edge 1-1/4″ X 8″	D-ACC-86F
Filler Plate: ASA Strike 4-7/8″ x 1-1/4″, 1-5/8″ Lip	D-ACC-ASAF
Filler Plate: 4-1/2″ Hinge Cover	D-ACC-HFP
Cylindrical Lock Cover Plate 2-1/8″ Dia.	D-ACC-161CP
Steel Flat Astragal With Metal Screws for 6/8 Doors	D-ACC-FA68
Steel Flat Astragal With Metal Screws for 7/0 Doors	D-ACC-FA7
Steel Flat Astragal With Metal Screws for 8/0 Doors	D-ACC-FA8
Hinge Shim for Steel Doors 4-1/2″ Reversible	D-ACC-HIS
Flat Hinge Shim 16ga. Steel	D-ACC-FHS
Glass Stop 5/8″ x 5/8″ x 120″ Drilled for Screws	D-ACC-1035
Gray Primer Spray Can	D-ACC-PRIM
Through Bolt 1/4″ Dia. For 1-3/4″ Doors	D-ACC-THB

Request Quote

Customer Support

Specifications

Additional specifications are available from your account manager

How To Order

Contact us today to work with a dedicated account manager. Your account manager can process orders, provide written quotes, assist with product selection, offer competitive discounts and guarantee the
lowest possible prices on high quality commercial door products. If you would like to speak
with someone now feel free to give us a call. For quality control reasons our site does not offer online ordering. Working with a dedicated account manager will ensure not only the lowest prices but the highest level of customer satisfaction and order accuracy