- Get it All at usafiredoor.com
- Expert Support
- Free Shipping*
- Request Quote
D-1600 16 Gauge Galvanized Steel Hollow Metal Doors
Galvanized steel, epoxy primer, insulated core, seamless edges, hurricane rated, 3hr. fire rated
D-1600-161-Steel Door
D-1600 hollow metal doors feature 16 gauge galvanized steel seamless edge construction, a polystyrene insulated core and a two stage baked on epoxy resin primer. These hollow metal doors are 3 hour fire rated and approved by the states of Florida & Texas for use in hurricane impact areas. D-1600 series galvanized steel doors are recommended for interior or exterior use where an extra heavy duty hollow steel door is needed. Pair this with our fire-rated hollow metal door frame.
Galvanized 16 Gauge Steel Door Features:
Baked On 2 Stage Epoxy Resin Primer
Polystyrene Insulated Core
Warnock Hersey 3 Hour Fire Label
ADA Compliant
Double Steel Door Configurations Available
FL Approved, Texas TDI Impact Inland 1, Seaward Zone
Hollow Steel Door Starting At: $290
(844)321-3667 (DOOR)(844)321-3667 (DOOR)
Shop By Size & Hardware Prep
161 Cylindrical Lock Prep
| Door Size | Hinge Locations | HW Location | ||||||
| (Feet/Inches) | Door Size (Inches) | Net Panel Size | (A) | (B) | (C) | (D) | (E) | Part Number |
| 3/0 x 6/8 | 36″ x 80″ x 1-3/4″ | 35-3/4″ x 79-1/8″ x 1-3/4″ | 7-3/8″ | 37-5/16″ | 67-1/4″ | X | 39-9/16″ | D-1600-161-3068 |
| 3/0 x 7/0 | 36″ x 84″ x 1-3/4″ | 35-3/4″ x 83-1/8″ x 1-3/4″ | 7-3/8″ | 39-5/16″ | 71-1/4″ | X | 43-9/16″ | D-1600-161-3070 |
| 3/4 x 7/0 | 40″ x 84″ x 1-3/4″ | 39-3/4″ x 83-1/8″ x 1-3/4″ | 7-3/8″ | 39-5/16″ | 71-1/4″ | X | 43-9/16″ | D-1600-161-3470 |
| 3/6 x 7/0 | 42″ x 84″ x 1-3/4″ | 41-3/4″ x 83-1/8″ x 1-3/4″ | 7-3/8″ | 39-5/16″ | 71-1/4″ | X | 43-9/16″ | D-1600-161-3670 |
| 3/8 x 7/0 | 44″ x 84″ x 1-3/4″ | 43-3/4″ x 83-1/8″ x 1-3/4″ | 7-3/8″ | 39-5/16″ | 71-1/4″ | X | 43-9/16″ | D-1600-161-3870 |
| 4/0 x 7/0 | 48″ x 84″ x 1-3/4″ | 47-3/4″ x 83-1/8″ x 1-3/4″ | 7-3/8″ | 39-5/16″ | 71-1/4″ | X | 43-9/16″ | D-1600-161-4070 |
| 3/0 x 8/0 | 36″ x 96″ x 1-3/4″ | 35-3/4″ x 95-1/8″ x 1-3/4″ | 7-3/8″ | 32-11/16″ | 58″ | 83-5/16″ | 55-9/16″ | D-1600-161-3080 |
86 Mortise Lock Prep
| Door Size | Hinge Locations | HW Location | ||||||
| (Feet/Inches) | Door Size (Inches) | Net Panel Size | (A) | (B) | (C) | (D) | (E) | Part Number |
| 3/0 x 6/8 | 36″ x 80″ x 1-3/4″ | 35-3/4″ x 79-1/8″ x 1-3/4″ | 7-3/8″ | 37-5/16″ | 67-1/4″ | X | 39-15/16″ | D-1600-86-3068 |
| 3/0 x 7/0 | 36″ x 84″ x 1-3/4″ | 35-3/4″ x 83-1/8″ x 1-3/4″ | 7-3/8″ | 39-5/16″ | 71-1/4″ | X | 43-15/16″ | D-1600-86-3070 |
| 3/4 x 7/0 | 40″ x 84″ x 1-3/4″ | 39-3/4″ x 83-1/8″ x 1-3/4″ | 7-3/8″ | 39-5/16″ | 71-1/4″ | X | 43-15/16″ | D-1600-86-3470 |
| 3/6 x 7/0 | 42″ x 84″ x 1-3/4″ | 41-3/4″ x 83-1/8″ x 1-3/4″ | 7-3/8″ | 39-5/16″ | 71-1/4″ | X | 43-15/16″ | D-1600-86-3670 |
| 3/8 x 7/0 | 44″ x 84″ x 1-3/4″ | 43-3/4″ x 83-1/8″ x 1-3/4″ | 7-3/8″ | 39-5/16″ | 71-1/4″ | X | 43-15/16″ | D-1600-86-3870 |
| 4/0 x 7/0 | 48″ x 84″ x 1-3/4″ | 47-3/4″ x 83-1/8″ x 1-3/4″ | 7-3/8″ | 39-5/16″ | 71-1/4″ | X | 43-15/16″ | D-1600-86-4070 |
| 3/0 x 8/0 | 36″ x 96″ x 1-3/4″ | 35-3/4″ x 95-1/8″ x 1-3/4″ | 7-3/8″ | 32-11/16″ | 58″ | 83-5/16″ | 55-15/16″ | D-1600-86-3080 |
| 3/6 x 8/0 | 42″ x 96″ x 1-3/4″ | 41-3/4″ x 95-1/8″ x 1-3/4″ | 7-3/8″ | 32-11/16″ | 58″ | 83-5/16″ | 55-15/16″ | D-1600-86-3680 |
RPD Reinforced for Panic Device
| Door Size | Hinge Locations | HW Location | ||||||
| (Feet/Inches) | Door Size (Inches) | Net Panel Size | (A) | (B) | (C) | (D) | (E) | Part Number |
| 3/0 x 6/8 | 36″ x 80″ x 1-3/4″ | 35-3/4″ x 79-1/8″ x 1-3/4″ | 7-3/8″ | 37-5/16″ | 67-1/4″ | X | N/A | D-1600-RPD-3068 |
| 3/0 x 7/0 | 36″ x 84″ x 1-3/4″ | 35-3/4″ x 83-1/8″ x 1-3/4″ | 7-3/8″ | 39-5/16″ | 71-1/4″ | X | N/A | D-1600-RPD-3070 |
| 3/4 x 7/0 | 40″ x 84″ x 1-3/4″ | 39-3/4″ x 83-1/8″ x 1-3/4″ | 7-3/8″ | 39-5/16″ | 71-1/4″ | X | N/A | D-1600-RPD-3470 |
| 3/6 x 7/0 | 42″ x 84″ x 1-3/4″ | 41-3/4″ x 83-1/8″ x 1-3/4″ | 7-3/8″ | 39-5/16″ | 71-1/4″ | X | N/A | D-1600-RPD-3670 |
| 3/8 x 7/0 | 44″ x 84″ x 1-3/4″ | 43-3/4″ x 83-1/8″ x 1-3/4″ | 7-3/8″ | 39-5/16″ | 71-1/4″ | X | N/A | D-1600-RPD-3870 |
| 4/0 x 7/0 | 48″ x 84″ x 1-3/4″ | 47-3/4″ x 83-1/8″ x 1-3/4″ | 7-3/8″ | 39-5/16″ | 71-1/4″ | X | N/A | D-1600-RPD-4070 |
| 3/0 x 8/0 | 36″ x 96″ x 1-3/4″ | 35-3/4″ x 95-1/8″ x 1-3/4″ | 7-3/8″ | 32-11/16″ | 58″ | 83-5/16″ | N/A | D-1600-RPD-3080 |
Continuous Hinge Prep
| Door Size | Hinge Locations | HW Location | |||||||
| (Feet/Inches) | Door Size (Inches) | Net Panel Size | (A) | (B) | (C) | (D) | (E) | Part Number | |
| Continuous Hinge Prep 161 Lock Prep | |||||||||
| 3/6 x 7/0 | 42″ x 84″ x 1-3/4″ | 41-17/32″ x 83-1/8″ x 1-3/4″ | Full Mortise Continuous Hinge Reinforcement | 43-9/16″ | D-1600-CH161-3670 | ||||
| 4/0 x 7/0 | 48″ x 84″ x 1-3/4″ | 47-17/32″ x 83-1/8″ x 1-3/4″ | Full Mortise Continuous Hinge Reinforcement | 43-9/16″ | D-1600-CH161-4070 | ||||
| Continuous Hinge Prep 86 Lock Prep | |||||||||
| 3/0 x 7/0 | 36″ x 84″ x 1-3/4″ | 35-17/32″ x 83-1/8″ x 1-3/4″ | Full Mortise Continuous Hinge Reinforcement | 43-15/16″ | D-1600-CH86-3070 | ||||
| 3/6 x 7/0 | 42″ x 84″ x 1-3/4″ | 41-17/32″ x 83-1/8″ x 1-3/4″ | Full Mortise Continuous Hinge Reinforcement | 43-15/16″ | D-1600-CH86-3670 | ||||
| 4/0 x 7/0 | 48″ x 84″ x 1-3/4″ | 47-17/32″ x 83-1/8″ x 1-3/4″ | Full Mortise Continuous Hinge Reinforcement | 43-15/16″ | D-1600-CH86-4070 | ||||
| Continuous Hinge Prep RPD Reinforcement | |||||||||
| 3/0 x 7/0 | 36″ x 84″ x 1-3/4″ | 35-17/32″ x 83-1/8″ x 1-3/4″ | Full Mortise Continuous Hinge Reinforcement | N/A | D-1600-CHRPD-3070 | ||||
| 3/6 x 7/0 | 42″ x 84″ x 1-3/4″ | 41-17/32″ x 83-1/8″ x 1-3/4″ | Full Mortise Continuous Hinge Reinforcement | N/A | D-1600-CHRPD-3670 | ||||
| 4/0 x 7/0 | 48″ x 84″ x 1-3/4″ | 47-17/32″ x 83-1/8″ x 1-3/4″ | Full Mortise Continuous Hinge Reinforcement | N/A | D-1600-CHRPD-4070 | ||||
Factory Prep Options
VL 12″ x 12″
NL 7″ x 22″
NL 5″ x 35″
NL 6″ x 27″
1/4 Glass (5″ x 56″)
1/3 Glass (8″ x 56″)
Half Glass
Full Glass
SEC 10″ x 6″
L 12″ x 12″
L 18″ x 12″
L 18″ x 18″
L 18″ x 24″
L 24″ x 12″
L 24″ x 18″
L 24″ x 24″
L 18″ x 64″
L 24″ x 60″
L 24″ x 64″
| Shop Modifications | Part Number |
| Cut-Out Non Reinforced/Non Fire Rated (24″ x 36″ Max) | D-MOD-CUT1-NR |
| Lg. Cut-Out Non Reinforced/Non Fire Rated | D-MOD-CUT2-NR |
| Cut-Out with Channel Reinforcement (24″ x 36″ Max) | D-MOD-CUT1 |
| Lg. Cut-Out with Channel Reinforcement | D-MOD-CUT2 |
| Mail Slot Prep -Non Fire Rated | D-MOD-CUT-MAIL |
| Door Viewer Prep | D-MOD-DV |
| Deadbolt Prep: 2-1/8″ Dia. 2-3/4″ Backset | D-MOD-DB |
| Deadbolt Prep: 1-1/2″ Dia. 2-3/4″ Backset | D-MOD-DB1.5 |
| Face Prep For 86 Mortise Locks | D-MOD-86F |
| Face Prep For Exit Device Trim | D-MOD-RIMF |
| Face Prep for Through Bolts | D-MOD-THB |
| Card Lock Face Prep for 86 Mortise Edge Doors | D-MOD-CARD |
| 161 Lock Prep, 2-1/8″ Dia. 2-3/4″ Backset | D-MOD-161 |
| 86 Mortise Lock Prep, 1-1/4″ x 8″ Edge Prep | D-MOD-86 |
| Convert 86 Prep to 161 Prep | D-MOD-86161 |
| Inactive Door: Prep for ASA Strike & Flush Bolts | D-MOD-INA |
| Roller Latch Prep | D-MOD-RL |
| Flush Bolt Prep Only | D-MOD-FB |
| Weld-on Flat Astragal | D-MOD-ASTW |
| Deadbolt Strike Prep for Inactive Doors | D-MOD-DBS |
| Blank-Out ASA Strike for Inactive Doors | D-MOD-XSTR |
| Door Height Undercut (4″ Max) | D-MOD-CUT-DHT |
| Blank-Out Lock Edge & Face | D-MOD-XLOCK |
| Automatic Door Bottom Prep | D-MOD-ADB |
| Concealed Overhead Closer Prep | D-MOD-COC |
| Accessories | Part Number |
| Conversion Plate: Mortise Lock To Cylindrical Lock | D-ACC-1024 |
| Conversion Plate: Mortise Lock To 4 7/8″ ASA Strike | D-ACC-1043 |
| Filler Plate: 161 Latch 1-1/16″ X 2-1/4″ | D-ACC-161F |
| Filler Plate: 86 Mortise Edge 1-1/4″ X 8″ | D-ACC-86F |
| Filler Plate: ASA Strike 4-7/8″ x 1-1/4″, 1-5/8″ Lip | D-ACC-ASAF |
| Filler Plate: 4-1/2″ Hinge Cover | D-ACC-HFP |
| Cylindrical Lock Cover Plate 2-1/8″ Dia. | D-ACC-161CP |
| Steel Flat Astragal With Metal Screws for 6/8 Doors | D-ACC-FA68 |
| Steel Flat Astragal With Metal Screws for 7/0 Doors | D-ACC-FA7 |
| Steel Flat Astragal With Metal Screws for 8/0 Doors | D-ACC-FA8 |
| Hinge Shim for Steel Doors 4-1/2″ Reversible | D-ACC-HIS |
| Flat Hinge Shim 16ga. Steel | D-ACC-FHS |
| Glass Stop 5/8″ x 5/8″ x 120″ Drilled for Screws | D-ACC-1035 |
| Gray Primer Spray Can | D-ACC-PRIM |
| Through Bolt 1/4″ Dia. For 1-3/4″ Doors | D-ACC-THB |
Request Quote
Specifications
Additional specifications are available from your account manager
How To Order
Contact us today to work with a dedicated account manager. Your account manager can process orders, provide written quotes, assist with product selection, offer competitive discounts and guarantee the
lowest possible prices on high quality commercial door products. If you would like to speak
with someone now feel free to give us a call. For quality control reasons our site does not offer online ordering. Working with a dedicated account manager will ensure not only the lowest prices but the highest level of customer satisfaction and order accuracy
lowest possible prices on high quality commercial door products. If you would like to speak
with someone now feel free to give us a call. For quality control reasons our site does not offer online ordering. Working with a dedicated account manager will ensure not only the lowest prices but the highest level of customer satisfaction and order accuracy
- Get it All at usafiredoor.com
- Expert Support
- Free Shipping*
- Request Quote
